Coloris : 15 choix, dont blanc, vert, bleu, jaune et rose
Éclairage : culot E27, blanc chaud ou blanc
Dans la salle à manger ou le salon, Chroméa apporte la couleur au plafond avec son abat-jour en métal, à accorder au mobilier ou aux textiles.
Informations clés
Puissance
10W
Source lumineuse
Lampes LED
Tension
110V-240V
Alimentation
Festverdrahtung
Caractéristiques
Éclairage
Culot
E27
Température de couleur
Blanc chaud/Blanc
Dimensions & installation
Dimensions
30 cm · 40 cm · 50 cm
Câble réglable
Oui
Installation
Oui
Pièces recommandées
Chambre;Salle à manger;Salon
Surface recommandée
5㎡-10㎡
Matériaux & finitions
Matériaux
Métal
Structure
Métal
Abat-jour
Métal
Finitions
Blanc classique · Blanc moderne · Nuances de vert · Vert · Noir · Nuances de bleu · Gris · Bleu · Nuances de gris · Nuances de rose · Jaune · Rouge · Nuances de rouge · Nuances d'orange · Rose
Caractéristiques techniques
Type de luminaire
Suspension
Utilisation
Intérieur
Indice de protection
IP20
Contenu du colis
Inclus
1* Suspension
Guidance by light familyYour light, step by step
Choose a family to explore general installation guidance. For your own light, follow the instructions supplied with the model.
Which kind of light are you preparing?
Select a family above to see the relevant general guidance.
A pendant light, at the right height
Guidelines for preparing the installation of a pendant light or chandelier.
01
Prepare the location
Choose the height and mark the bracket. Before any electrical work, switch off the power at the main panel and verify that there is no voltage.
02
Secure and connect
The weight must be supported by a suitable ceiling fixture. Follow the instructions for securing the light fitting and connecting it to the power supply.
03
Finish, then turn on
Close the ceiling canopy and install the bulb if the model requires one. Check that everything is secure before turning the power back on.
A well-prepared ceiling
Ceiling lights and spotlights: understanding the key steps before you begin.
01
Identify the installation type
Surface-mounted ceiling light, recessed spotlight, or track lighting: check the mounting surface and the required clearance according to the instructions. Turn off the power and verify that there is no voltage.
02
Install the mount
Attach the mounting plate or bracket designed for your model. The connection and positioning of the power supply unit must follow the manufacturer’s instructions.
03
Close and verify
Select any necessary internal settings before closing. Put the body or the diffuser in place, check the attachment, then test the lighting.
Light takes its place on the wall
Wired, plug-in or rechargeable: the installation depends on your wall light.
01
Prepare for installation
Identify your version's power supply and choose its height. For a wall-mounted light, turn off the power and verify that there is no voltage.
02
Put down the stand.
Wall mounting: follow the instructions for the base. Plug-in night light: use a compatible socket. A magnetic module does not guarantee a drill-free installation.
03
Commission
Install the wall lamp body. Hardwired: follow the instructions with an electrician. Plug-in or rechargeable: plug in or charge according to your version, then test.
From the base to the light
Prepare the pieces, assemble the silhouette, and find its place in the room.
01
Prepare the items
With the lamp unplugged, place the parts on a protected surface. Identify the base, the mast sections, and the lampshade in the instructions.
02
Assemble the structure
Assemble the structure without pinching or twisting the cable. Install any light bulbs and the lampshade or globes in the order specified in the instructions.
03
Check stability
Place the floor lamp on a stable surface, keep the cable out of the way, and then put it into service according to the instructions.
Light within reach
Basic setup for table, desk, and bedside lamps.
01
Choose its place
Stable surface, screen clamp or bottle holder: check the location and compatibility for your model. Unpack the parts on a protected surface.
02
Assemble and power on
Assemble the base or the lampshade if necessary. Use the plug, USB power supply, or charger indicated for your version, with a compatible bulb if required.
03
Discover the commands
Turn on the lamp and try out the intended controls. Adjust its orientation and the available settings for your reading or ambiance.
A pose that prepares for comfort
The support, the space around the blades, and the assembly are checked together.
01
Have the ceiling checked.
A professional will check the mounting, power supply, height, and blade clearance for your model. The support must be suitable for a moving device.
02
Follow the assembly instructions
For a standard installation, assemble the parts in the order indicated in the instructions. For an E27 model, follow its specific instructions after verifying the socket and the support. Any electrical work must be performed with the power off, after verifying that there is no voltage.
03
Check the operation
After mounting and connection, the installer checks the stability and operation. Test the controls and the lighting if your version is equipped with it.
Get ready for your nights out
Two paths to distinguish: solar lighting or a grid-connected installation.
01
Choose the location
Check the authorized exposure for the lighting fixture. For a solar model, the panel must receive sufficient sunlight; for a hardwired model, have the power supply checked.
02
Ask according to your version
Fix or install the solar model according to its instructions. For a wired version, entrust the mounting and connection to an electrician, ensuring the power is off and the required waterproofing is applied.
03
Adjust and observe
Solar: activate the intended mode, let it charge, then check after nightfall. Wired: test after installation and adjust the sensor only if your model has one.
Watch on this page
Our assembly demonstrations
Follow the instructions supplied with your light. Have fixed electrical connections made by an electrician.
The selected demonstration is shown next to the steps. View this video
Lampshade assembly example
Mojlife · PH5 example: lampshade assembly; ceiling wiring is not shown.
The video is not loading at the moment. The steps are still available on this page.
Ceiling light with an integrated LED
Filmed example of the installation of a surface-mounted LED ceiling light. Fastening and wiring according to your model’s instructions, with an electrician.
The video is not loading at the moment. The steps are still available on this page.
Wall light with a bulb
Filmed example of assembling a bulb wall lamp. Electrical preparation and connection must be performed by an electrician in accordance with your model's instructions.
The video is not loading at the moment. The steps are still available on this page.
Rectangular LED wall light
Filmed example of how to assemble a rectangular LED wall light. Electrical preparation and connection must be carried out by an electrician according to your model’s instructions.
The video is not loading at the moment. The steps are still available on this page.
Linear LED wall light
Filmed assembly example of a two-bar LED wall light. Electrical preparation and connection must be performed by an electrician according to your model's instructions.
The video is not loading at the moment. The steps are still available on this page.
Ceiling fan with a short mounting body
Model shown: Nordic Wooden Ceiling Fan Light — Radilum.